Software versions
Have you signed a software update agreement?
This allows you to update your Machine and Office Software to the next level.
- Includes free Machine software updates
- Includes free Office software updates
- Machine software and Office software versions must match
- For updates of additionally purchased Office licenses, the update packages for subsequent licenses are required
- Online connection to the PC must be available
What do I need to do?
Please contact RAS. After checking the data, we will contact you. We need the following information:
- Adress
- Contact person with Email and Phone
- Machine number
Version 3.2.4.36285
- Manual engagement in the bending program made possible
- Programs with manual engagement are marked with a blue triangle
- On four-sided parts, sharp tools can soft clamp on the side hems
- Improved bending strategy for hems inside a profile
- Upper beam opening varies depending on the stop position
- Upper beam also opens for parts when center of gravity is outside the machine
- New upper beam tools implemented
- New gauging system configuration implemented
- Upper beam tool setup remains after changing material thickness
Version 3.2.3.35341
- Generation of programs for profiles with side hems that are bent with the sharp tool.
- Additional strategies when bending hems: Long flange protrudes from the machine when pre-bending the hem. Clamping on the short flange .
- Radius step bending:
- Material tables optimized for entering the springback correction
- Criteria for interpolation of the springback correction optimized
- Radius bending with the radius tool:
- Software takes into account that the bending radius widens after bending
- Simulated and bent parts are marked in the strategy selection
- Programming can be stopped with "Cancel". Programs that have already been generated are shown.
- Radius tools implemented
- New upper beam tools implemented
- In the "Manage tools" menu:
- Sorting the tools according to several criteria
- Segmented folding beam tools implemented
- Improved view color of the part base when importing step files
- Color marking of the selected flange in the correction menu
- Strategies without stars are no longer shown
Version 3.2.0.33089
- Clamping on hems possible with automatic calculation of upper beam clamping dimension
- Opening heights of the upper beam optimized for shorter bending times
- Calculation of bending strategies for parts with hems inside the part
- Optimized upper beam upstroke after hemming
- New gauging system configuration implemented
- Squaring arm can be selected in loading options
- Smallest stop dimension reduced from 6 mm to 5 mm
Version 3.1.7.31782
- Clamping on hems possible with automatic calculation of upper beam clamping dimension
- Opening heights of the upper beam optimized for shorter bending times
- Calculation of bending strategies for parts with hems inside the part
- Optimized upper beam upstroke after hemming
- New gauging system configuration implemented
- Squaring arm can be selected in loading options
- Smallest stop dimension reduced from 6 mm to 5 mm
Version 3.1.7.31597
- New upper beam tools implemented
- Upper beam opens at the end of a program (without considering the part's center of gravity)
- Software considers a shift of the bend line when using radius tools
Version 3.1.6.30564
- New bending strategies for profiles implemented
- Upper beam opening heights optimized
- Foot switch acknowledgments reduced
- Strategy selection for parts with "flips" improved
- Strategy selection for profiles with Z-bends improved
- Factor adjusted for blank calculation
- Material-specific blank calculation implemented
- Stop fingers remain in position control
- Min. stop dimension changed to 6 mm
- When flipping the part, the stop fingers remain in up position
- Part input extended by table input
- Number of shown table lines extended
- Input dialog for table input improved
- Sheet thickness for US market adjusted to "gauge"
- For new parts without material specification "steel" is set
- New upper beam tools implemented
- New folding beam tools implemented
- New stop configurations for 2.5 m and 3 m machine models
Version 3.1.05.29368
- New upper beam tools implemented
- New folding beam tools implemented
- New bending strategies for profiles implemented
- Input of negative angles in the dialog is no longer possible
- New gauging system configurations implemented
- Calculation blank dimension for different materials implemented (when importing STEP files the inside bend radius will be set to 1x sheet thickness)
- Field for radius input hidden
- Scale on the beams is shown in the simulation
Version 3.1.4.28164
- New upper beam tools implemented
- Closing of hems improved
- Swedish and danish language implemented
- Gauging system with brushed implemented
- Machine configuration menu extended
Version 3.1.3.27878
- New upper beam and radius tools implemented
- T-shape gauging system implemented
- Minimum sheet thickness set to 0.5 mm
- No folding beam adjustment within a program. At the beginning of the program the maximum required folding beam position is set.
- Texte bei Biegen von Umschlägen im manuellen Modus angepasst
- Texts adapted when bending hems in manual mode
- Dutch language
- Office version: Machine configuration menu implemented
Version 3.1.2.27441
- Editor for customized bending sequence implemented
- Hemming in the editor with separate two steps: pre-bending - closing the hem
- Hemming position adapted to tools
- New step bending interface for radii bending incl. correction tables
- Speed Optimizer: Opening the upper beam after the folding beam is <90° and the part's center of gravity is inside the machine
- When creating a part: visible side outside
- Bending angle shown positive/negative according to the bending direction
- Configuration "sheet thickness unlimited" implemented (example: bending of plastic material)
- New upper beam tools implemented
- Machine models adapted to modified machine design
- TURBO2plus RAS 62.25-2 implemented
- Improved part representation in the simulation
- Adjusted columns in the part selection
Version 3.1.0.25172
- Standard material thickness set to 0.5 mm
- Profileditor for the input of part profiles
- Upper beam tool 40V implemented
- Folding beam CrownTool implementiert
- Indication of folding beam adjustment
- Material tables added (without negative angles)
- Gauging at obtuse angles
- Stop finger support while closing hems