Skip to main content

Lots of intelligence

The EasyFormer swaging machines can be operated via a glass panel touch control. The 2-axes control automatically learns and memorizes the movement sequences from the operator.

  • Operating modes: Teach, Automatic, Manual
  • Manual: For one-time work
  • Teach: When running the first part of a production lot
  • Automatic: When applying the taught sequences for a series of parts
  • Storage and easy selection of up to 10 programs
  • Dimension-related setting of the upper wheel with digital display
  • Continuous or progressive setting of the upper wheel
  • Right-left-run for non-circulating seams
  • Soft speed-up and slow-down at start and at direction change
  • Two speed ranges for fast or sensitive work
  • Easy cleaning of the glass panel control
  • mm / inch selcetion

Suitable stop

The high-strength and extra-large stop plate is designed for the highest demands. In addition, other stop plates are available.

  • The divided stop can be used for almost all wheels
  • Stop plate for insulating pipes (RAS 12.35-2 only)
  • Special stop plate for bevel flanging wheels BD
  • Round stop for internal flanges on blanks (RAS 12.35-2 only)

Setting made easy

A convenient hand lever allows positioning of the lower wheel, so that both wheels are precisely positioned over one other. A clamping mechanism assures that the shafts stay in position.

  • Sensitively lower shaft positioning
  • Positioning of the lower to the upper wheel shape
  • Central shaft adjustment with lever and scale

Unique UnLock safety function

If at risk, simply pull one of the UnLock levers left or right on the machine frame and the wheels open immediately.

  • Mechanical shaft unlocking in case of emergency
  • Quick release
  • Also effective in case of power failure due to overload
  • UnLock function meets the highest safety standards

Versatile operation

The multi-function foot switch can be configurated. Thus, the machine follows the operation preferences of the worker. The foot switch can perform one of the following functions:

  • Right-left run
  • Continuous upper wheel adjustment
  • Progressive upper wheel adjustment
  • Advantage: The operator can always guide the part with both hands