Upper beam
The upper beam opens and closes with inpressive speed. As the open and close position is programmable, you can create open or closed hems, thus making your parts unique and versatile. The upper beam shape offers large free space in front and behind of the beam.
- Fast movements for closing/opening
- Hemming: closed, open, tear-drop hems
- Large free space in front of the upper beam (part design flexibility)
- Rigid upper beam for straight bends
- Servo drives and absolute encoders
- Accurate positioning, no calibration
Folding beam
The folding beam on the TURBO2plus is an example of engineering superiority. Fast folding cycles lead to high productivity. An impressive plus is its ability to adjust the folding beam automatically to the actual material thicknesses.
- Fast movement: short cycle times
- Deep folding beam: excellent bend results
- Adaptive: Automatic adjustment for material thickness
- No downtime for machine adjustments
- Long machine lifetime
- New folding beam design for improved accuracy
- Gentle and scratch-free bending of coated materials
- Servo motors and absolute encoder: quick operation, no calibration
Lower clamping beam
The lower clamping beam is designed with a deep box configuration for maximum strength and resistance.
- Precise and straight bends
- Optimized crowning for improved accuracy
- Long lifetime of the machine
- Rigid unibody unit together with the side stands
- Maximum resistance to deflection and torsion
Gauging system
The fingers of the gauging system position the workpiece for each bend. All stop fingers disappear below the table surface when the part has to be rotated on the sheet support table.
- Fast positioning, repeatable accuracy
- No 2nd operator (50% cost saving)
- No marking (30% time saving)
- Sheet support carries the weight of the blank
- Solid front and rear stop fingers
- Servo drive and absolute encoder: no calibration
- Adaptive to working task and available floor space
- Center orientation for best bend results
- Rectangular backgauge 6-1550 mm
- T-gauging system for big parts (6-3050 mm)
- Active squaring arm for narrow parts (lifting movement)
Versatile tooling system
The three segment sharp tool can be taken on and off by a single operator in no time. The segmented goat's foot tooling is precision designed, and literally "quick-clamps" and locks in position so that it is ready to work within seconds.
- Large free spaces for part design flexibility
- Segmented tools: Basic segments, adapter set, corner left/right
- Automatic recognition of a tool change
- Automatic recognition of the tool height
- Different tool heights up to 127 mm
- Short setup times due to quick locking mechanism
- Folding beam tools for different thicknesses and Z bends
- Segmented folding beam tools available
- CrownTool with adjustable crowning
- Lower beam tool with finger pockets
One-click part programming
Where experience and expertise were formerly required for programming, this intelligence is embedded in the machine software. Parts can be drawn on the touchscreen monitor or imported as STEP, DXF, or GEO files … and that is it! A simple mouse click is all that is required to program the complete setup and bend sequence automatically.
- Simple creation of profiles and panels
- Exact and error-free transfer of CAD data
- Automatic programming of the bending process
- No expert knowledge required
- Software suggestion of the best folding sequence
- 3D simulation of the bending process
- Highest bending accuracy due to material tables
- Loading individual programs or processing job lists
- Online support via TeamViewer